|
Who's Online
There currently are 5863 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
I-5
Dirt on the back of paper
<Printing> Possible cause Fixing unit Step 1 Check Is the pressure roller dirty? Is any other area in the printer dirty? Dirt in the drum unit 2 Is the transfer roller dirty? Is the problem solved after the drum unit is replaced? No Replace the high-voltage power supply PCB. Yes Result Yes Remedy Clean the pressure roller. (See the following note.) Replace the drum unit
Note: Clean the pressure roller as follows; (1) Set three or more sheets of paper in the MP sheet feeder. (2) Open the top cover. (3) Turn on the power switch while holding down the switch on the printer control panel. (4) Release the panel switch when the Drum lamp is on. (5) Close the top cover. (6) Hold down the panel switch until the Ready lamp is on, then release the switch. (7) Print three patterns; grid, zip and solid black. (8) Turn off the power switch with the top cover closed. (9) Set paper in the manual slot with the solid black side up. (10) Turn on the power switch while holding down the switch on the control panel. (11) Release the panel switch when the Drum lamp is on. (12) Press the panel switch again and release it immediately. (13) Print a page of test pattern while cleaning the pressure roller.
IV-10
|
|
|
> |
|